Design Specifications:
VARUN cross flow cooling tower operates according to cross flow principle. The hot water is fed in to a FRP splash box, having target nozzles in the bottom to equally distribute water over PVC perforated V- bar fill. By evaporation and direct contact the water transfers heat to the air, which is sucked in by propeller type fan? The cold water is collected in a basin at the bottom of the tower for re-circulation.
Casing:
Casting is made of tough FRP panels and has sufficient structural strength to withstand high wind velocities and vibrations.
Fills and Drift Eliminator:
PVC Perforated V Bar type fill is supplied, to provide maximum wetted surface, longer air water contact and more efficient water cooling. Drift Eliminators are made of PVC and positioned between fill and fan cylinder.
Water Distribution System:
Hot water distribution splash box is open gravity type, will be made of FRP with HDPE gravity target nozzles.
Basin: It is generally a RCC basin and is to be designed and constructed by the client, in accordance with out drawing.
Fan:
The fan is of aero dynamic design, directly driven propeller type. It is made of adjustable Cast Aluminum blades and hub. The fan is statically and dynamically balanced.
Electric Motor:
Special totally enclosed flange mounted motors, with extended shaft and sealed top is supplied with cooling tower. The motor is having totally weather proof IP-55 degree of protection, suitable for hot and humid atmosphere and it is covered by FRP motor cover.